
Calorimetry lesson and practice problems
Presentation
•
Chemistry
•
9th - 12th Grade
•
Practice Problem
•
Easy
Standards-aligned
Tania Murphy
Used 5+ times
FREE Resource
3 Slides • 13 Questions
1
Calorimetry
By Tania Murphy
2
calorimetry is the process of measuring the amount of heat released or the amount of heat absorbed in a chemical reaction or physical proces
What is calorimetry?
3
4
Drag and Drop
5
Drag and Drop
6
Drag and Drop
7
Drag and Drop
8
Math Response
The next several slides will deal with the following scenario. Write your work down on a piece of paper as you go. We will take a stepwise approach to solving the problem. A 58.8 g piece of hot alloy (metal) is placed in a calorimeter that contains 125 g of cold water. The temperature of the alloy decreases by 106.1 C, while the temperature of the water increases by 10.5 C. The specific heat of water is 4.184 J/gC. What is the specific heat of the alloy? Step 1: Calculate the heat absorbed by the water using
q=m c deltaT
enter with one digit behind the decimal and do not put a unit
9
Drag and Drop
10
Math Response
Same question continued. Use the heat gained by the metal, the mass of the metal and the change in temperature of the metal to calculate the specific heat of the metal. Type in your answer with three digits after the decimal and no units.
11
Drag and Drop
The mass of the sample of water is
12
Math Response
A 20.50 g sample of a metal is placed in a beaker of water that is boiling at 100 degrees Celsius. The hot metal is then quickly removed from the boiling water and placed in 105.0mL of water at a temperature of 25.6 degrees Celsius. The final temperature of the water is 28.7 degrees Celsius. We will take a step wise approach to determining the specific heat of the metal. (the specific heat of water is 4.19=84 J/gC)
Step 1: Calculate the heat gained by the water and enter here (round to the tenth place
13
Math Response
Use your previous answer to calculate the specific heat of the metal and type in your answer (round to the thousandth place)
14
Drag and Drop
15
Math Response
A piece of metal with a mass of 3.99 g and an initial temperature of 100.0 degrees Celsius is placed into 59.0 mL of water at a temperature of 21.0 degrees Celsius causing the temperature of the water to rise 2.5 degrees Celsius. What is the specific heat of the metal? (round to two digits after the decimal)
16
Math Response
You will complete this problem on your own. A 75.0 g metal is in boiling water at 100.0 degrees Celsius. The metal is quickly removed and placed into 150 mL of water at 25 degree Celsius causing the temperature of the water to rise to 26.8 degrees Celsius. What is the specific heat of the metal?
(round to the thousandth place)
Calorimetry
By Tania Murphy
Show answer
Auto Play
Slide 1 / 16
SLIDE
Similar Resources on Wayground
10 questions
Stoichiometry Lesson
Presentation
•
9th - 12th Grade
13 questions
Ionic Versus Covalent
Presentation
•
9th - 12th Grade
11 questions
Fusion vs. Fission
Presentation
•
9th - 12th Grade
9 questions
Moles - Percent Composition
Presentation
•
9th - 12th Grade
11 questions
Bonding Notes / Lesson
Presentation
•
9th - 12th Grade
11 questions
Earth Sciences: Earth's Spheres
Presentation
•
9th - 12th Grade
12 questions
Parallelograms
Presentation
•
9th - 12th Grade
12 questions
The Mole & Gram to mole conversions
Presentation
•
9th - 12th Grade
Popular Resources on Wayground
24 questions
PBIS-HGMS Day 10
Quiz
•
6th - 8th Grade
10 questions
HCS SCI 03 Summer School Review 3
Quiz
•
3rd Grade
11 questions
Home Scope
Quiz
•
7th - 8th Grade
15 questions
HCS SCI 05 Summer School Assessment 3 Review
Quiz
•
5th Grade
35 questions
Lufkin Road Middle School Student Handbook & Policies Assessment
Quiz
•
7th Grade
18 questions
Geo 11.3 Area of Circles and Sectors
Quiz
•
9th - 11th Grade