All valves controlling connections to water supplies and

standpipes _____ be listed indicating valves

A _____ standpipe system shall provide

2 1∕2 in. (65 mm) hose connections to supply water for use by

fire departments and those trained in handling heavy fire

streams

The maximum pressure at any point in the system at any

time shall not exceed _____

For Class I and Class III systems, the minimum flow

rate for the hydraulically most remote standpipe shall be ______ through the two most remote

2 1∕2 in. outlets

The minimum flow rate for additional standpipes

shall be ______ per standpipe for buildings with

floor areas that do not exceed 80,000 ft2 per floor

Standpipes shall be at least ___ in size.

A _______ standpipe system shall provide either 1 1∕2 in.

(40 mm) hose stations to supply water for use by trained

personnel or a hose connection for the fire department during

initial response

The horizontal portion of the

system piping that delivers the water supply for two or more

hose connections, and for sprinklers on combined systems,

on a single level.

A standpipe system

containing water at all times that is attached to a water

supply capable of supplying the system demand at all times

and that requires no action other than opening a hose valve

to provide water at hose connections

A standpipe system that supplies

both hose connections and automatic sprinklers

A standpipe system with no permanently attached water supply that relies exclusively on the fire department connection to supply the

system demand

A system that provides 1 1∕2 in.

hose stations to supply water for use by trained

personnel and 2 1∕2 in. hose connections to supply a

larger volume of water for use by fire departments

A high-rise building is a building where the floor of an

occupiable story is greater than ____ above the lowest

level of fire department vehicle access

A standpipe system containing water at all times that relies exclusively on the fire department connection to supply the system demand

A ____ _____ test shall be performed at the low point drain

for each standpipe or the main drain test connection where

the supply main enters the building (when provided)

Hydrostatic tests of not less than _______

pressure for 2 hours, or at 50 psi in excess of the

maximum pressure, where maximum pressure is in excess

of 150 psi, shall be conducted every 5 years on

manual standpipe systems and semi-automatic dry

standpipe systems, including piping in the fire department

connection