IC 85 - 126

Buildings used for assembly can be classified as a Group B occupancy when the occupant load is less than ___ persons.

What is the minimum thickness of a concrete floor slab supported directly on the ground?

What is the maximum allowable span for a 2-2 x 8 girder within an exterior bearing wall supporting a roof and ceiling only having a building width of 28 feet with a ground snow load of 50 psf?

Which occupancy group is a Physician's office classified as?

In conventional light-frame building construction, anchor bolts which anchor sill plates resting on concrete foundations shall have a minimum diameter of ____ inches spaced a maximum ___ feet on center and extend a minimum of ___ inches into concrete.

True or False. Framing inspections shall be made before the approval of rough plumbing inspection.

A fire door shall be rated for a minimum of ___ minutes when located within a 3-hour exterior wall assembly.

Concrete footings shall be protected from freezing during depositing and for a minimum time period of thereafter. HINT: IBC, Section 1808.8.4.

Where plain concrete is permitted for construction of exterior basement bearing walls, the minimum required thickness shall inches. Table 1807.1.6.2 and ACI 318-Table 14.3.1.1.

Evaluation of load tests of deep foundation elements is permitted to use all methods except which one of the following: