Mousetrap Cars
Authored by Christy Rodgers
Science
6th - 8th Grade
NGSS covered
Used 18+ times
AI Actions
Add similar questions
Adjust reading levels
Convert to real-world scenario
Translate activity
More...
Content View
Student View
15 questions
Show all answers
1.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
During the Industrial Revolution (1750-1850), society experienced a transition to a __________-based industry.
Steam
Electronics
Machine
Human powered
2.
MULTIPLE CHOICE QUESTION
1 min • 1 pt
Given the power of the steam engine, it was______ machines that made these new tools work.
Simple
Mechanical
Complicated
Steam powered
3.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
In the picture, a simple machine, called a _______ is used to raise a heavy box with considerably less effort than the job would require without the tool.
Lever
Pry Bar
Wood Plank
Teeter Totter
4.
FILL IN THE BLANKS QUESTION
1 min • 1 pt
Mechanical Advantage = Output Force /Input Force
So if the output is 50 and the input is 5, then what is the Mechanical Advantage?
(a)
5.
MULTIPLE CHOICE QUESTION
1 min • 1 pt
There are six simple machines. Please describe which machine is pictured.
A lever consists of a beam that pivots about a fixed hinge, or fulcrum.
The wheel and axle consists of a wheel attached to a smaller axle so that these two parts rotate together.
A pulley is a wheel on an axle or shaft that is designed to support movement and change of direction of a taut cable or belt.
An inclined plane, also known as a ramp, is a flat surface tilted at an angle.
6.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
Which of the six simple machines is pictured here?
A wedge is a triangular shaped tool, and is derived from the inclined plane.
The wheel and axle consists of a wheel attached to a smaller axle so that these two parts rotate together.
A lever consists of a beam that pivots about a fixed hinge, or fulcrum.
A screw is essentially an inclined plane wrapped around a cylinder.
7.
MULTIPLE CHOICE QUESTION
30 sec • 1 pt
Which of the six simple machines is this?
The wheel and axle consists of a wheel attached to a smaller axle so that these two parts rotate together
An inclined plane, also known as a ramp, is a flat surface tilted at an angle.
A pulley is a wheel on an axle or shaft that is designed to support movement and change of direction of a taut cable or belt.
A wedge is a triangular shaped tool, and is derived from the inclined plane.
Tags
NGSS.MS-PS2-1
NGSS.MS-PS2-2
Access all questions and much more by creating a free account
Create resources
Host any resource
Get auto-graded reports
Continue with Google
Continue with Email
Continue with Microsoft
or continue with
%20(1).png)
Apple
Others
Already have an account?
