Sealant Storage

Sealant should be used within ___________________.

Sealant should not be applied to metal that is colder than ________________.

Before the sealant is applied, the metal warmed to a temperature between ________________________.

____________ is the pressure filling of openings or voids.

The joint between two pieces of material formed by a notch and tilled projection is called ____________________.

Sealant should be discarded immediately when it becomes _______________.

Sealant should not be used for faying surface applications unless it has been removed to ________________.

Never use RTV sealant around high temperature and pressure, such as for ____________________.

On engine with an oxygen sensor, use only ___________ that says - sensor safe on the level.

Sealants cannot be ______________ to dirty, greases, or oily surface.