Which of these changes to the electric circuit shown will cause the lightbulb to light up? (5.6B)

Turning one battery so that its positive end connects to the other battery's negative end

Straightening the wire so that the current can flow more easily

Adding a switch and more wire so that the current can flow more easily

Making the length of wire the same on both sides of the lightbulb

The diagram shows the metal posts that are usually found on a battery. The battery can be connected to a bell and a switch to produce sound. Which statement best explains why there are two metal posts on the battery? (5.6B)

The battery needs to form a complete circuit that starts with one metal post and ends with the other metal post.

The battery needs only one metal post to connect to the bell, but the other metal post is present in case the first post fails to work.

One metal post makes a complete circuit with the switch, and the other metal post makes a complete circuit with the bell.

One metal post makes the bell start to ring, and the other metal post makes the bell ring louder.

A group of students built the circuit shown here. The lightbulb does not glow. Which statement explains this observation? (5.6B)

The lightbulb is not part of a complete circuit.

The circuit does not have a switch.

The bell uses most of the energy from the battery.

Students constructed a circuit using different-colored lightbulbs. What will happen if Switch 3 is closed and the other switches are left open? (5.6B)

Only the white and yellow bulbs will operate.

Only the white bulb will operate.

None of the bulbs will operate.

Only the red and blue bulbs will operate.

The circuit shown does not work. Which procedure would most likely allow the bulbs to light? (5.6B)

Connect the two wires that are attached to the wood block

Open the switch and then connect the two wires that are attached to the wood block

Switch the positions of the two wires that are connected to the battery and the open the switch

Move the switch closer in the circuit to the battery

Why is electrical wiring usually made from copper?

Because copper conducts electricity

Because copper insulates electricity

If no changes are made to this circuit, what will the results be?

Only the left bulb is lit because it has a closed path. The right bulb is not lit because of the open switch

Both bulbs are off because the switch is open

Both bulbs are lit because they each have a complete, closed path to the battery

Only the right bulb is lit because an open switch causes the energy to flow to the bulb.

A material that allows electricity to flow through it. The circuit is complete.

A material that does not allow electricity to flow through. It stops the flow of electricity.

Students conducted an investigation using the equipment shown in the picture. The results from their investigation are shown in the table. Study the results in the table carefully. What investigation were the students most likely testing?

D. Insulation of Electrical Energy

A. Conduction of Thermal Energy

B. Conduction of Electrical Energy

C. Insulation of Thermal Energy

Electricity and Circuits

Authored by Elena Miranda

Science

5th Grade

NGSS covered

Used 110+ times

AI Actions

Add similar questions

Adjust reading levels

Convert to real-world scenario

Translate activity

More...

Content View

Student View

25 questions

Show all answers

MULTIPLE CHOICE QUESTION

2 mins • 1 pt

What is a switch?

part of the toaster that you plug into the wall

an outlet that gives power

part of a circuit that starts or stops the electricity

MULTIPLE CHOICE QUESTION

2 mins • 1 pt

A conductor is ____________

something that allows electric current to flow easily

something that limits the flow of electricity

Tags

NGSS.4-PS3-2

MULTIPLE CHOICE QUESTION

30 sec • 12 pts

For electrical energy to flow, there must be a(n) ______.

good battery

copper wire

on/off switch

closed circuit

Tags

NGSS.MS-PS3-5

MULTIPLE CHOICE QUESTION

30 sec • 12 pts

Which of the following is NOT a conductor?

Water

Aluminum

Wood

Penny

Tags

NGSS.MS-PS2-3

MULTIPLE CHOICE QUESTION

30 sec • 12 pts

In a _________ circuit, the components are arranged with one path for the current.

series

parallel

MULTIPLE CHOICE QUESTION

30 sec • 12 pts

Which type of circuit would you use in order to turn each component on and off separately?

Series

Parallel

MULTIPLE CHOICE QUESTION

30 sec • 12 pts

Pennies can be used to make a battery because they are __________.

conductors

insulators

capacitors

voltage

Tags

NGSS.MS-PS2-3

Access all questions and much more by creating a free account

Create resources

Host any resource

Get auto-graded reports

Continue with Google

Continue with Email

Continue with Microsoft

or continue with

Facebook

Apple

Others

Already have an account?

Similar Resources on Wayground

20 questions

Chapter 4 - Ecosystems

Quiz

•

5th Grade

26 questions

Natural Disasters

Quiz

•

5th - 10th Grade

20 questions

Food Groups

Quiz

•

4th - 7th Grade

20 questions

Land Formation

Quiz

•

5th Grade

20 questions

Exploring the Water Cycle

Quiz

•

5th Grade

20 questions

Single and Multicellular Organisms

Quiz

•

5th Grade

20 questions

Science Day and Night Cycle

Quiz

•

5th Grade

20 questions

Organisms and Environment Review

Quiz

•

5th - 6th Grade

Popular Resources on Wayground

24 questions

PBIS-HGMS Day 10

Quiz

•

6th - 8th Grade

10 questions

HCS SCI 03 Summer School Review 3

Quiz

•

3rd Grade

11 questions

Home Scope

Quiz

•

7th - 8th Grade

15 questions

HCS SCI 05 Summer School Assessment 3 Review

Quiz

•

5th Grade

35 questions

Lufkin Road Middle School Student Handbook & Policies Assessment

Quiz

•

7th Grade

18 questions

Geo 11.3 Area of Circles and Sectors

Quiz

•

9th - 11th Grade

Discover more resources for Science

15 questions

HCS SCI 05 Summer School Assessment 3 Review

Quiz

•

5th Grade

Electricity and Circuits

What is a switch?

A conductor is ____________

For electrical energy to flow, there must be a(n) ______.

Which of the following is NOT a conductor?

In a _________ circuit, the components are arranged with one path for the current.

Which type of circuit would you use in order to turn each component on and off separately?

Pennies can be used to make a battery because they are __________.

A fifth grade class constructed this circuit. Which of these objects most likely made the light glow when connected to points X and Y?

Which of these best completes the circuit?

What material would be safest to use as an insulator to cover electrical wires?

Access all questions and much more by creating a free account

Similar Resources on Wayground

Popular Resources on Wayground

Discover more resources for Science