Digital Multimeter

To measure voltage

To measure current

To measure resistance

All of the above

nothing

resistance

current

voltage

Digital Multimeter, DC Motor, Alligator Clips

Battery, Resistor, Capacitor

LED, Switch, Diode

Transistor, Inductor, Transformer

To measure voltage

To measure current

To measure resistance

All of the above

To select the measurement type

To turn the device on or off

To change the voltage range

To connect to the power source

Plug and Tip

Wire and Connector

Red and Black

Positive and Negative

Visible damages

Battery level

Calibration

Brand

Review previous material

Introduce new concepts

Take a quiz

Discuss homework

One

Zero

Negative

Positive

Plug it into the COM Jack

Plug it into the V/Ohms/mA Jack

Leave it unplugged

Connect it to the battery

Pull it out halfway

Push it all the way down

Leave it as is

Twist it to the left

10

20

200

2000

Attach one end of the alligator clips to the multimeter probes

Detach the alligator clips from the multimeter probes

Use the alligator clips to measure voltage

Connect the alligator clips to a power source

Connect it to the black probe tip

Connect it to the red probe tip

Leave it disconnected

Connect it to the ground

Attach the clips to the red wire

Attach the clips to the white wire

Attach the clips to the black wire

Do not attach the clips

Turn on the multimeter

Set the multimeter to AC mode

Connect the probes

Select the resistance mode

Touching the probe tips

Using the multimeter

Changing the settings

Ignoring the warning

The current

The voltage

The resistance

The frequency

The height of the turbine

The material the turbine is made of

The color of the turbine

The speed of the wind

It will be boring

It will be challenging

It will be enjoyable

It will be difficult

food, clothing, sleeping

social approval

money or a paycheck

principal's award for good conduct