
Fluids
Presentation
•
Science, Mathematics
•
University
•
Hard
+1
Standards-aligned
Elisha G.
Used 6+ times
FREE Resource
16 Slides • 13 Questions
1
FE Review: Fluid Mechanics
by Prof. EMH Garcia
2
Other Disciplines
3
Civil Engineering
4
Multiple Choice
1. What is the pressure at a point 18,000 ft below the surface of the ocean? (γ = 64.0 ft3lb)
1,150,000 psig
250 psig
8,000 psig
258,000 psig
5
6
Multiple Choice
2. For the barometer shown in the figure, what is the atmospheric pressure if hm = 20 cm, ρm= 13,550 m3kg, and pv = 0 kPa ?
128 kPa
26.6 kPa
4.36 kPa
82.4 kPa
7
8
Multiple Choice
3. In the figure, what is the absolute pressure (pA) in vessel A?
15.8 psia
18.4 psia
13.6 psia
11.0 psia
9
10
Multiple Choice
4. Water flows through a 20-cm-diameter pipe. If the critical Reynolds number is 2,300, what is the maximum value of the average velocity for which laminar flow can be assumed?
0.047 m/s
1.2 m/s
0.0092 m/s
0.75 m/s
11
12
Multiple Choice
5. What is the coefficient of drag for a flow of air ( ρ= 1.225 m3kg, μ=1.8×10−5 m2N.s ) over a flat plate that is 93 cm long, if V∞=86 sm ?
3.38×10−3
5.70×10−3
2.19×10−3
8.27×10−3
13
14
Multiple Choice
6. Water flows through a 17-cm-diameter horizontal pipe ( (f=0.017) at a rate of 0.34 sm3 . What is the frictional head loss per meter of pipe length?
1.31 m
1.14 m
0.02 m
0.78 m
15
16
Multiple Choice
7. What is the pumping power required for the system shown in the figure? (Neglect friction in the pipes.)
58,900 kW
65,400 kW
82,300 kW
53,000 kW
17
18
Multiple Choice
8. What is the Mach number of a fluid stream flowing at a velocity of 370 ft/s? (c = 1,080 ft/s)
0.66
2.92
0.34
3.4
19
20
Multiple Choice
9. For steady flow of a compressible fluid in the expander shown in the figure, what is the density at the exit section ( ρ2 )?
190 kg/m3
62 kg/m3
642 kg/m3
127 kg/m3
21
22
Multiple Choice
10. What is the average velocity of the water entering the tee?
4.63 m/s
3.95 m/s
3.54 m/s
0.35 m/s
23
Multiple Choice
11. What is the for (F) required to keep the tee stationary?
5.66 N
2.21 N
6.32 N
7.41 N
24
25
Multiple Choice
12. If 16 kg/s of water, traveling at 67 m/s, enters the impulse turbine shown in the figure, which has a 26-cm diameter and a blade angle α of 120° , what is the maximum power that can be generated?
134 W
402 W
26.9 kW
8.98 kW
26
27
Multiple Choice
13. What is the volumetric flow rate (Q) of water ( γ=9,810 m3N ) for the venturi flow meter shown in the figure?
0.232 m3/s
0.248 m3/s
0.733 m3/s
0.467 m3/s
28
29
FE Review: Fluid Mechanics
by Prof. EMH Garcia
Show answer
Auto Play
Slide 1 / 29
SLIDE
Similar Resources on Wayground
20 questions
Muestreo
Presentation
•
University
24 questions
Hurricane Notes
Presentation
•
12th Grade
21 questions
Verb to be
Presentation
•
University
21 questions
Compound Inequalities (A1 1-6)
Presentation
•
7th - 10th Grade
24 questions
SES-FAD (Basic Algebra before Differentiation)
Presentation
•
University
20 questions
Materi Kaidah Pencacahan (2)
Presentation
•
12th Grade
21 questions
Addition and Subtraction
Presentation
•
KG
22 questions
Introduction to Hydraulics
Presentation
•
University
Popular Resources on Wayground
24 questions
PBIS-HGMS Day 10
Quiz
•
6th - 8th Grade
10 questions
HCS SCI 03 Summer School Review 3
Quiz
•
3rd Grade
11 questions
Home Scope
Quiz
•
7th - 8th Grade
15 questions
HCS SCI 05 Summer School Assessment 3 Review
Quiz
•
5th Grade
35 questions
Lufkin Road Middle School Student Handbook & Policies Assessment
Quiz
•
7th Grade
18 questions
Geo 11.3 Area of Circles and Sectors
Quiz
•
9th - 11th Grade