english procedure

As vocational school student, you can try these steps. First, turn on the soldering iron and wait for it to heat up. You can try to melt soldering wire on the soldering tip to proof it. Second, hold the solder like a pen. Make your hand confortable to handle it. Third, stick the solder tip on the component, for example resistor feet. Fourth, stick the solder wire until it melts. Fifth, pull the solder wire and the solder tip. Make sure the component connected well, by stop moving. Sixth, turn off the soldering iron. Seventh, clean the solder tip after use to make sure your soldering iron long lasting use.

Doing practical teaching-learning in vocational school workshop can be dangerous. Here is how you can keep your safety. First, always wear protective clothing including hard hats, gloves, vests, masks, belts, eyewear and proper footwear. Second, all areas should be kept clean and free of debris. Third, never attempt to operate any machinery without the proper training. Fourth, return the tools you took as before. Fifth, See and understand the labels around you. Lastly, if there is an accident stop work immediately and report to the teacher.