CCNA Prep #2

What is the purpose of blocking login attempts after a specified number of failures?

What is the purpose of the exec-timeout command?

What type of ping allows you to specify the source IP address?

What type of ping prompts you for the protocol, target IP address, and number of echo requests?

Which command would you use to configure a router to block login attempts after 3 failed attempts within 60 seconds? Options: Router(config)# login block-for 120 attempts 3 within 60, Router(config)# exec-timeout 5 0, Router(config)# access-list 3, Router(config)# interface 60

What is the primary purpose of using an extended ping?

What is the effect of setting an exec-timeout of 5 0 on a router?

In global config, which command will cause a router to boot normally by loading the startup-config from flash? Options: R1(config)# config-register 0x2102, R1(config)# config-register 0x2142, rommon 1 > confreg 0x2102, rommon1 > confreg 0x2142

In ROMMON mode, which command will cause a router to ignore the startup-config when performing password recovery? Options: R1(config)# config-register 0x2102, R1(config)# config-register 0x2142, rommon 1 > confreg 0x2102, rommon1 > confreg 0x2142

How do you access the extended ping feature?